ESP32-S3 WaveShare Device Adaptation Case

This document serves as the case showcase entry from the project overview. Complete hardware description, firmware configuration, runtime screenshots and adaptation records will be added later.

Case Overview

This case targets the ESP32-S3 WaveShare development board, planned to verify WiFi networking, sensor acquisition, display driver, MQTT reporting and basic control capabilities.

Planned Content

• WaveShare board model and resource description
• Firmware environment and Flash/PSRAM configuration
• Display, sensor and button pin mapping
• Platform access and data reporting screenshots
• Compatibility issue records during adaptation

Temporary Verification Steps

1. Confirm the board model, Flash and PSRAM capacity.
2. Select the corresponding ESP32-S3 build environment.
3. Configure WiFi, MQTT and peripheral pins.
4. Flash firmware and check the display and serial console logs.
5. Confirm device online status and data reporting on the platform.